EasyWeed Electric 15" SOLD BY THE FOOT

  • $3.99
    Unit price per 
Shipping calculated at checkout.

Only 4 left!

 MIX AND MATCH COLORS AND SAVE!!!

 

15" WIDTH CUT TO LENGTH

These are sold in 12 inch increments. 

1 = 1 FOOT

3 = 1 YARD

5 = 5 FEET

15 = 15 FEET (5 yards)

30 = 30 FEET (10 yards)

 

If you select SHEETS, you will receive 15" x 12" sheets in the quantity you choose.

If you select ONE ROLL, you will receive a continuous ROLL in the number of feet you choose. 

You may order as many sheets as you need, and the volume discounts will apply as noted. For example, if you select 6, you will receive (6) 15"x12" sheets OR one roll that is 6 feet long and 15" wide. 

 

 

Siser's shimmery and pearlescent color line of standard heat transfer vinyl is here! EasyWeed Electric has the signature characteristics: easy to cut and weed, even smaller and intricate details, and is thinner than most vinyl. Make a fashion statement with these electrifying colors without sacrificing the soft feel!

Specifications:
  • CPSIA Certified as safe for use on all ages t-shirts and garments!
  • Compatible Fabrics: Cotton, Polyester, Cotton/Poly Blends, Leather
  • Shimmery, metallic finish and just 85 microns thick for stunning and comfy personalization across a wide range of apparel or fabric goods
  • Lined on a pressure-sensitive carrier for easy cut and weeding, even with intricate and fine detail designs
  • Care: Store unused roll media in dark/dry/cool area for up to 1 year for best results.
  • Due to manufacturing and cut-down process, it is possible that actual roll/material width may vary up to 0.25 inches
  • Please note: Siser EasyWeed Electric is heat transfer vinyl meant for use with a vinyl cutter with the use of foils. This is not a printable vinyl. Do not attempt to run it through a printer.

Cutter Settings

Cricut:

  • Blade: Standard
  • Setting: Iron-on

Silhouette Cameo:

  • Blade: Standard, 2
  • Material: Heat Transfer, Smooth
  • Speed: 8
  • Force: 4

Scan N Cut:

  • Blade: Standard, 2
  • Cut Speed: 1
  • Cut Pressure: 1

Roland GS/GX-24:

  • Blade: 45°
  • Gram Force: 80-90
  • Offset: .250
  • Speed: 25-50 cm/s

Graphtec:

  • Blade: 45°
  • Gram Force: 8-9
  • Tool: CB09+0
  • Speed: 30 cm/s

 

Application Instructions

Heat Press (Strongly Recommended)

  • Cut in reverse
  • Weed excess material
  • Cover design with Kraft paper or non-stick cover sheet
  • Preheat garment for 2-3 seconds
  • Apply design at 305°F/150°C
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

Home Iron

  • Cut in reverse
  • Weed excess material
  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 10-15 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  • Peel carrier hot or cold