EasyWeed Electric 15"

  • $3.99
    Unit price per 
Shipping calculated at checkout.


Siser's shimmery and pearlescent color line of standard heat transfer vinyl is here! EasyWeed Electric has the signature characteristics: easy to cut and weed, even smaller and intricate details, and is thinner than most vinyl. Make a fashion statement with these electrifying colors without sacrificing the soft feel!

Specifications:
  • CPSIA Certified as safe for use on all ages t-shirts and garments!
  • Compatible Fabrics: Cotton, Polyester, Cotton/Poly Blends, Leather
  • Shimmery, metallic finish and just 85 microns thick for stunning and comfy personalization across a wide range of apparel or fabric goods
  • Lined on a pressure-sensitive carrier for easy cut and weeding, even with intricate and fine detail designs
  • Care: Store unused roll media in dark/dry/cool area for up to 1 year for best results.
  • Due to manufacturing and cut-down process, it is possible that actual roll/material width may vary up to 0.25 inches
  • Please note: Siser EasyWeed Electric is heat transfer vinyl meant for use with a vinyl cutter with the use of foils. This is not a printable vinyl. Do not attempt to run it through a printer.

Cutter Settings

Cricut:

  • Blade: Standard
  • Setting: Iron-on

Silhouette Cameo:

  • Blade: Standard, 2
  • Material: Heat Transfer, Smooth
  • Speed: 8
  • Force: 4

Scan N Cut:

  • Blade: Standard, 2
  • Cut Speed: 1
  • Cut Pressure: 1

Roland GS/GX-24:

  • Blade: 45°
  • Gram Force: 80-90
  • Offset: .250
  • Speed: 25-50 cm/s

Graphtec:

  • Blade: 45°
  • Gram Force: 8-9
  • Tool: CB09+0
  • Speed: 30 cm/s

 

Application Instructions

Heat Press (Strongly Recommended)

  • Cut in reverse
  • Weed excess material
  • Cover design with Kraft paper or non-stick cover sheet
  • Preheat garment for 2-3 seconds
  • Apply design at 305°F/150°C
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

Home Iron

  • Cut in reverse
  • Weed excess material
  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 10-15 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  • Peel carrier hot or cold